Superiority
Consistent swabbing
-A robot is perfect for repetitive work which makes it ideal to be used for swabbing.
-Process stability
Decreases the amount of swab liquid
-Reduced swabbing oil.Clean machines.
Gain time for optimizing the process
-A swab robot will gain time for the operators to use the process sensor systems for optimizing the process to achieve higher output from the machine.
Increase the output
-The swab robot swabs the blank molds“on the fly”which increases the output from the machine.
Reduces risk for accidents
-The swab robot decreases the time the operator needs to interact with the machine and therefore risk for accidents.
Eliminate strain injuries
-During an 8 hour shift an operator approximately performs 700 swab movements,and lifts the arm to activate the manual swab cycle more than 200 times.Using a swab robot avoid repetitive strain injury.
Mold life time
-The Swab Robot sprays the swab liquid on the surface of the mold.Compared to the traditional swab brush where the liquid is applied with the brush on the surface the spray method is more gentle and do not create any ware on the mold surface
Equipment Parameter
Electric Connection
-Voltage:380VAC
-Frequency:50-60HZ
-Power:5KVA
Pneumatic Connection
-Pressure:0.7MPa
-Flow:1500L/Min Relevant Air Pressure Setting
Address: No. 577 Xinhua Avenue, Zhoucun District, Zibo, Shandong: 86-533-6181717
Copyright © Shandong Sanjin Glass Machinery Co., Ltd. all rights reserved, Lu ICP, No. 09074865.